Typical Schematic Section for a Remote Outlet
Contact us for a quote to do your BAL report or your BMO report
Our assessors work all over Victoria.
If you plan to use a remote outlet from the tank ie a standpipe with a CFA fitting, it must be
gravity feed from the bottom of the tank to the point of outlet. We will also need a Schematic section
drawing showing the fall and distance from the tank to the point of outlet, in a format suitable
to use across an A4 page. Note the outlet has to be a minimum of 300mm and a maximum
of 600mm above ground. The drawing preferably should be a schematic ie it does not have to be to scale
Refer: Guidelines for remote outlets on water tanks in the Bushfire Management Overlay
Available 7 days a week, ring us on 0417 885 747
We now accept Card payments
We would welcome the opportunity of expanding on any of the points
mentioned above.
BAL ASSESSMENTS
Mobile: 0417 885 747
email:
[email protected]
7 |
Home |
What is a BAL |
Bushfire Management Overlay |
Tasmania |
BAL and Building Costs |
Insurance |
Information we need |
Methodology |
Equipment |
Assessors |
McArthur Forest Fire Danger Meter Mk5 |
McArthur Grassland Fire Danger Meter Mk4 |
Slope Limits |
BAL-Chart |
